Most commercial roofs should be professionally inspected at least once or twice each year, ideally during the spring and fall. Additional inspections are recommended after severe storms, high winds, hail, heavy snowfall, construction activity, or work performed by other contractors on the roof.

Regular inspections can identify open seams, damaged flashing, blocked drainage, deteriorating sealants, and other developing conditions before they result in interior leaks or more extensive damage. The appropriate schedule may vary based on the roof’s age, material, condition, warranty requirements, and surrounding environment.

The timeline depends on the size and complexity of the roof, the selected roofing system, the amount of preparation or tear-off required, weather conditions, material availability, and any concealed damage discovered during construction.

Small repairs or maintenance may be completed within a day, while restoration and replacement projects may require several days or longer. After inspecting the property and defining the scope of work, Attar Roofing Solutions will provide an estimated schedule and communicate any conditions that could affect completion.

Common warning signs include interior leaks, ceiling stains, unusual odors, bubbling paint, standing water, blocked drains, loose or open seams, cracked membrane, punctures, deteriorated flashing, rust, loose fasteners, and repeated repairs in the same area.

Soft or spongy areas underfoot may also indicate deteriorated or moisture-affected materials beneath the roof surface. Because some problems remain hidden until significant damage has developed, a roof can still benefit from inspection even when no active leak is visible.

Commercial roof leaks frequently originate at seams, penetrations, drains, curbs, parapet walls, flashings, pitch pockets, expansion joints, and perimeter transitions. Other causes include aging materials, punctures, storm damage, clogged drainage, standing water, improper installation, structural movement, and damage caused by rooftop equipment or other contractors.

The location where water appears inside the building may not be directly beneath the exterior entry point. Water can travel through the roofing assembly before becoming visible indoors, which is why a thorough inspection is important.

Attar Roofing Solutions responds to urgent commercial roofing concerns as availability and weather conditions permit. Our first priority is to identify the likely source of water intrusion and determine whether temporary protection or an immediate repair can be performed safely.

Emergency work may be followed by a more thorough inspection after conditions improve. If your building is experiencing active water intrusion, move valuable equipment and inventory away from the affected area when it is safe to do so, document the damage, and contact us as soon as possible.

The appropriate solution depends on the roof’s age, attachment, membrane condition, insulation, drainage, previous repairs, and the amount of moisture or deterioration within the assembly.

Localized damage may be repairable. A roof that remains structurally sound and largely dry may qualify for restoration. Widespread trapped moisture, deteriorated insulation, failing attachment, severely damaged materials, or recurring leaks may make replacement the more dependable long-term option. Our inspection and reporting process is designed to explain which approach is most appropriate and why.

A Thermal Roof Moisture Assessment uses infrared imaging to identify temperature patterns that may be consistent with moisture trapped beneath a flat or low-slope roof membrane. Wet and dry roofing materials often heat and cool at different rates, allowing suspected moisture-related areas to become visible under suitable environmental conditions.

The completed report combines thermal images with corresponding visual photographs, mapped areas of concern, observed roof conditions, and recommended next steps. It can be purchased as a standalone service whether or not Attar Roofing Solutions performs the resulting roofing work.

Thermal imaging is a powerful nondestructive screening tool, but it does not independently prove the presence of moisture or identify every leak entry point. It reveals thermal patterns that may be consistent with moisture beneath the roof surface.

When significant anomalies are found, targeted core samples, moisture probes, interior observations, or other verification methods may be recommended. Combining these findings gives property owners a much clearer understanding of the roof’s condition and helps focus further investigation where it is most valuable.

Warranty availability depends on the selected roofing system, existing roof conditions, approved materials, contractor qualifications, installation requirements, inspections, and manufacturer approval.

Qualifying systems may offer material-only coverage or more comprehensive manufacturer-backed options. Depending on the approved system, warranty terms may extend up to 20 years for qualifying TPO systems and up to 25 years for qualifying PVC systems. Before work begins, the proposal should identify the specific warranty being offered, its term, its coverage, and any inspection or maintenance obligations.